Name: SQN 4s IV
SKU: G16042019-1
Price: 95.00 EUR
Availability: InStock

Features and Specification – SQN-4S Series IV
Mixer Inputs	Four transformerless balanced inputs using XLR-3 type female connectors. Channels one and two also share an XLR-5 type connector. Each channel is switchable for: Powering: a)12V T (Din AB) b)12V Phantom c) 48V Phantom d) Dynamic (150 to 600 Ohms) Attenuation: 0dB, -12dB or -24dB Bass Cut: Flat, -4dB or -10dB at 100Hz Line Attenuation: Adds 50dB attenuation before the mic preamp.
Sensitivity	-78dBu for nominal line level (PPM4, 0VU) with the channel gain at maximum and the master gain at 0dB
Max Level, Mic Inputs	-20dBu (+4dBu with 24dB attenuation)
Noise Figure	-130dBu (A weighted) from a 200 Ohm source.
Frequency Response	20Hz to 20kHz +0, -1dB, referred to 1kHz.
Crosstalk	Isolation, channel to unrelated channel: 75dB at 1kHz, 60dB at 15kHz.
Channel Configuration [GANG] [MAT]	The mixer is intended to work in several modes. The mode controls affect channel pairs CH1 & 2 and CH3 & 4. Within the pairs, channels 1 & 3 are called “first channels” and 2 & 4 “second channels”. Twin MONO [O] in which the channels are unganged and each input channel can be routed or panpotted to either or both of the output channels. Stereo [S] ganging in which the first channel fader controls the gain of both channels and the first channel panpot acts as a stereo balance control Mid-Side [MS] ganging in which the first channel fader controls the gain of both channels and the second channel fader acts as an image width control. Mid-Side Matrix [MAT] matrixing in which each channel pair has a mid-side matrix which will convert an MS input into AB stereo or vice-versa. Panning Mode [PAN]. The CH3, CH4 pair has a selectable panning mode in which the output is treated as MS encoded stereo and the channel signal is panned to move across the equivalent AB stereo image.

SQN 4s IV

Related products