Dimming in the Palm of Your Hand
BBS introduces a state-of-the-art remote control unit, designed to provide ON-OFF and 16-BIT dimming of the Area 48 Soft LED remote phosphor lighting fixture. The new Remote control allows single- or multi-fixture remote dimming of Area 48 Soft fixtures smoothly, from 100% to blackout.
Ends Standing Tiptoe for On-fixture Controls
The ON-OFF switch toggles the light between blackout and the desired the setting on the rotary dimming knob. The Remote overrides the settings of the Area 48’s on-fixture controls. The Remote overrides the on-fixture software settings of all the Area 48’s when they are connected via 5 Pin DMX cables to the master Area 48 that the Remote is powering via the BBSNet software.
Control Single or Multi Fixtures
The Remote plugs in, via 4-pin connector, between an Area 48 Soft and the fixture’s Power Supply Unit (PSU) or battery. Up to a 5 meter (16 foot) cable can be used when the light is powered via battery. Up to a 10 meter (32’) cable can be used when the fixture is powered by an Area 48 PSU.
A virtually unlimited number of Area 48 Softs, (connected via DMX 5-pin cabling) can be controlled by the same Remote. To provide multi-fixture control, the Area 48 Soft lights are required to be running the latest software, Version 2.0.06, (includes the new BBSNet software) which is free on www.brothers-sons.dk. There is even a video tutorial to run through the software upgrade.
• Rotary knob with analog numeric call out • Operates infinite number of Area 48
fixtures in unison
• 4-pin XLR In and Out
• Requires Area 48s to run on
• Black out button
• Software Version 2.0.06 or higher • Accuracy: 16 BIT
LENGTH: 5.25”/13.3cm HEIGHT: 2.25”/5.7cm WIDTH: 1.5/8”/4.1cm